DeWalt drills are known for being reliable and durable machines that can do whatever you need them to do. However, if you have a drill bit stuck in your DeWalt drill, then you won’t be able to use all its fantastic features until you can get it out! So let’s find out how.
If you can’t get a drill bit out of a DeWalt drill, you can use a wrench, vice, or pliers to remove the bit by turning the chuck of the drill counterclockwise. Luckily, once you do so, the drill bit should either fall out or be able to be removed with just your fingers from the drill.
In this article, we will step through the exact instructions of how to get a drill bit out of a DeWalt drill, as well as how to stop this problem from occurring in the future! In just a few moments, you are going to be an expert at getting stuck drill bits out of DeWalt drills.
How to Get a Drill Bit Out of a DeWalt Drill
Although it sounds too good to be true, your drill bit might not actually be stuck! You just might not be removing it correctly.
So before we dig into what you need to do if the drill bit is, in fact, caught in the drill, we’re going to go through the step-by-step instructions on how to take it out of a functioning drill.
Here’s what you need to do:
- Put your hand around the chuck or the black casing around the drill tip.
- Move counterclockwise to loosen the chuck.
- The drill tip should fall right out!
However, if these directions don’t work, don’t worry. Although the drill bit is technically stuck, you can still easily get it out in just a few seconds.
How to Get a Stuck Drill Bit Out of a DeWalt Drill
When a drill bit is stuck in a DeWalt drill, you don’t need to panic. You can simply remove it, and all you need is a tool such as a pair of pliers, a wrench, or even a vice grip to do so.
Instead of using your hand to move the chuck counterclockwise, you will use your chosen tool as it applies more pressure and will easily be able to move the chuck and open the space where the drill bit is stuck.
From there, the drill bit will either fall out, or you can wiggle it and remove it with your fingers.
It’s important to note that you may have to put a significant amount of pressure when turning the chuck if it is really jammed. However, you should be careful not to break the drill in the process!
Why Do Drill Bits Get Stuck in DeWalt Drills?
Now, many of you may be wondering why drill bits often get stuck in DeWalt drills. And the truth is that it’s not a defect or problem with the drill itself.
Drill bits can and do get stuck in all brands and models of drills. But why does this happen?
Well, nine times out of ten, if a drill bit gets stuck, it is because of user error when the drill bit was placed into the drill.
So in order to ensure you don’t have to constantly get drill bits unstuck from your drill, we are going to find out how to put them in correctly.
How to Prevent Drill Bits from Getting Stuck
The best way to ensure your DeWalt drill bits are not constantly getting stuck in the chuck is to ensure you put them in the right way!
When you look at the head of your DeWalt drill, you will see three jaws or little bits of metal in the hole. When you twist the chuck (the black plastic casing around the head of the drill), you can see these jaws open and close.
And the purpose of this technology is so that you can use any size drill bit you need for your project, as you can open them wide and then securely tighten them around the bit.
However, many people make the mistake of misaligning the drill bit when they tighten the chuck and, therefore, the jaws around it.
It is absolutely vital that you place the drill bit in the direct center of the three jaws and keep it straight as you tighten the chuck.
If you do this correctly, your drill bit won’t get stuck nearly as often!
The Bottom Line
Hopefully, you now successfully got your drill bit out of a DeWalt drill!
And not only do you know what to do if it gets stuck again, but you also have all the information you need to ensure you put the drill bit in correctly in the first place!
